iPhone and iPad Speaker Issue? At this point, we can’t simply determine that why your iPhone or iPad speaker won’t works.
It is necessary to know how the speaker works there are two things that happen to make sound with speakers.
First is Software which decides which sound to play and when to play.
Here are some basic troubleshooting steps to fix your speaker not working issue
- Make sure that your device is not in silent mode by turning up the volume and flipping the silent switch to the “Ring” position.
- Make sure that your volume is all way up. Most of the situations accidentally turn the volume all the way down on your iPhone or flip the silent switch if you’re using a big, bulky case. So unlock your iPhone and hold the volume up button until your phone will turned up all the way. If the volume isn’t turning up even as you hold down the volume up button, then go to “Settings” > “Sounds & Haptics” and make sure that switch next to “Change with Buttons” is turned on.
- Make Sure that your iPhone isn’t stuck on Headphone mode. You can check this by holding the volume up button. When headphones are connected to the iPhone then all sound plays through the headphones, not through the speaker. But if your iPhone thinks headphones are plugged in but there is not any headphone is connected and your iPhone tries to play sound through headphones. Basically this is usually happens when a piece of debris or small amount of liquid gets inside of the headphone jack and fools the iPhonethat headphone is plugged in.
Second is Hardware the built-in speakers in your iPhone or iPad converts the software’s instructions into sound waves you can hear.
- If your iPhone or iPad speaker is broken, APN IT Experts iPhone repair service that will meet you at a location in Delhi NCR of your choice in as little as 60 minutes and repair your iPhone on the spot.